Stoxnet Photo Galleries

BriSCA F1 Stock Car Racing


DSC01030.JPG
The far end of the wing having been torn away by the impact
DSC01031.JPG
The trailing edge of the wing shows where the flap track has sheared off (the round reddish section)
DSC01033~0.JPG
Rivets and anchor nuts in this piece
DSC01034~0.JPG
The leading edge of the wing with the slat still attached and partially extended.
DSC01035~0.JPG
A closer look at the slat. Adding these aerodynamic aids to later variants made the aircraft tricky to handle.
DSC01036~0.JPG
A fuel bladder tank within the wing
DSC01037~0.JPG
More of the same
DSC01038~0.JPG
Wing structure. There was considerably more wing parts at the second site for some reason.
DSC01039~0.JPG
Tailplane section
DSC01040.JPG
Attachment point of the leading edge of the tailplane section. The different materials used highlighted by corrosion on some parts.
DSC01041.JPG
The oleo and wheel at the second site
DSC01042.JPG
The tyre looking like it's been sliced
DSC02732.JPG
The 2019 Gala Night pre meeting pit scene. A fair few different driver /car combinations. Here's F2's Ben Lockwood in a DK car.
DSC02746~0.JPG
F2's Ollie Skeels in the 326 car
DSC02748a.jpg
The Sam Wass car
1852 files on 124 page(s) 85