Stoxnet Photo Galleries

BriSCA F1 Stock Car Racing

Home > 2021 Season

Most viewed - 2021 Season
67_These_blocks_were_the_supports_for_the_steam_engine.JPG
 These blocks were the supports for the steam engine17 viewsRoy
60_An_on-site_standby_reservoir_has_dried_out_long_ago.JPG
 An on-site standby reservoir has dried out long ago17 viewsRoy
59_Another_view_of_the_gas-holder.JPG
 Another view of the gas-holder17 viewsRoy
103a.JPG
 16 viewsRoy
96_The_arches_were_the_inlet_channels_that_fed_the_reservoir_on_this_side.JPG
 The arches were the inlet channels that fed the reservoir on this side16 viewsRoy
95_Any_ideas.JPG
 Any ideas?16 viewsRoy
94_Not_a_lot_remains_of_this_one.JPG
 Not a lot remains of this one16 viewsRoy
92_Another_overgrown_reservoir.JPG
 Another overgrown reservoir16 viewsRoy
86_A_machinery_base.JPG
 A machinery base16 viewsRoy
85_Up_to_the_heavens.JPG
 Up to the heavens16 viewsRoy
83_The_stone_flagged_floor_within_the_mill.JPG
 The stone flagged floor within the mill16 viewsRoy
76_At_the_side_of_the_crane_track_was_a_cavity_with_this_metal_plate_attached.JPG
 At the side of the steam engine location site was a cavity with this metal plate attached16 viewsRoy
69_The_waterwheel_hub_and_axle_were_housed_in_this_recess.jpg
 The waterwheel hub and axle were housed in this recess16 viewsRoy
67a_The_back_wall_was_obviously_the_site_of_a_mechanism_with_an_axle_box_cavity_and_a_rotator.JPG
 The back wall was obviously the site of a mechanism with an axle box cavity and a rotator16 viewsRoy
65_A_blocked_up_passage_which_led_through_the_furnace.JPG
 A blocked up passage which led through the furnace16 viewsRoy
3722 files on 249 page(s) 1 - 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249